• News
  • Company News Industry news
  • Merchants
  • Join agent Join Process
  • Contact us
  • Contact us feedback
  • Industry news

    Guanli Rubber tells you how to reduce the tires of bicycle tires

    Source: Time:2019-02-25 22:52:43 次数:

    1, riding should pay attention to the situation of the road, try to avoid low-lying places, avoid the most end of the road, because these places are easy to accumulate sharp things such as glass slag, pressed to easily tie the tires. Of course, it is necessary to avoid sharp materials such as glass slag on the road. Road vehicles should also pay attention to the up and down shoulders, avoiding angular obstacles, etc.;

    1, riding should pay attention to the situation of the road, try to avoid low-lying places, avoid the most end of the road, because these places are easy to accumulate sharp things such as glass slag, pressed to easily tie the tires. Of course, it is necessary to avoid sharp materials such as glass slag on the road. Road vehicles should also pay attention to the up and down shoulders, avoiding angular obstacles, etc.;

    2, the installation of anti-belt tires, but the anti-tire tires are expensive, uneconomical, the average person can not afford;

    3, can be a layer of thick canvas between the inner tube and the outer tire, but the requirements are relatively high, if the pad is not flat, running can cause the wheel to swing, the car shakes at high speed, there are certain unsafe factors. This time the scooter feels not significant, the mountain bike is more obvious, the road car is more prominent, and increase the weight of the car, it is best not to do this;

    4, plug the small mouth, reduce the chance of twinning. This is also the tip that I will focus on. Every time after riding or before riding, check the tires. Look for these small mouths. If you suspect that there are foreign objects in the small mouth, use a less sharp scorpion or awl to explore. If you feel that there is no elasticity, it is hard. There is a feeling of encountering a stone, that is, a foreign object, must be selected.

    5, do not use too much force, or the inner tube will be leaked. After cleaning, plug these small holes with quick-drying glue that can stick rubber. Each small mouth can be filled with a little glue to fill the small mouth. The extra glue does not need to be rubbed, and it is naturally dry.